Fluorine lined valve manufacturer teaches you how to deal with fluorine lined valve leaks

Fluorine lined valves are used in many fields, but it is difficult to avoid some problems during use. Fluorine lined valve factory Here, I would like to share with you how to deal with the problem of fluorine lined valve leakage.

If there is internal leakage in fluorine lined valves, the cause should be analyzed first. It is possible that the valve is not tightly closed, the sealing surface of the valve seat or spool is severely worn, or the stroke of the valve is not set properly. If it's not tightly closed, just apply a little more force to close it; If it is a problem with the sealing surface, it can be solved by re grinding; If the valve core is damaged, the sealing surface needs to be re welded. If there is an external leakage phenomenon, it may be due to a leakage of the flange, just tighten the bolt slightly; It is also possible that the valve body is damaged, in which case the valve can only be replaced. Regardless of the type of problem, it must be actively addressed, otherwise it will affect future use.

This article is provided by the fluorine lined valve factory. Please indicate the copyright when reprinting: http://www.lierduofm.com/