Storage, use, and maintenance of clamp type fluorine lined butterfly valves

    clamp-on Fluorine-lined Butterfly Valve Storage, use, and maintenance:
In Clamp type fluorine lined butterfly valve Before use, gently open the valve to keep the butterfly plate in a slightly open state, and then place the valve in a ventilated and dry warehouse. They cannot be stacked together or stored outdoors. When storing the clamp type fluorine lined butterfly valve, it is necessary to first cover and seal both ends of the valve to prevent dust, impurities, etc. from entering the interior of the valve.
Before installing the clamp type fluorine lined butterfly valve, it is necessary to check whether the valve meets the operating requirements and confirm that it is correct before installation. During installation, it is not allowed to damage the sealing surface of the valve. When connected to the lined pipeline, there is no need to add gaskets. If connected to metal fittings, gaskets are required.
In the use of valves, they can only be fully opened and fully closed, cannot adjust flow rate, and cannot be used under negative pressure. Always observe the working condition of the valve, stop immediately if any malfunction is found, investigate the cause of the malfunction and eliminate it.

Correct installation and operation of fluorine lined butterfly valve