Installation Guide for Fluorine lined Three way Ball Valve

Fluorine lined three-way ball valve It is a valve with various advantages of ball valves, which is important in industry. So how can we make good use of fluorine lined three-way ball valves? All of this starts with the installation guide for fluorine lined valves.
Installation guide for fluorine lined three-way valve:

1. When installing, pay attention to whether the markings of the fluorine lined three-way valve are correct, such as whether the valve type, nominal diameter, pressure rating, material, etc. are correct, and whether the flow direction markings on the shell are consistent with the pipeline.
For fluorine lined three-way ball valves, horizontal installation is important, so horizontal installation should be chosen during installation to avoid excessive installation stress on the valve, which may affect its effectiveness.
3. In installation, if the pipeline connection surface is made of metal material, it is necessary to add fluoroplastic sealing plates.
If the pipeline has been subjected to high difficulty, then the valve does not need to be supported after installation. Otherwise, it is recommended to install valve specific support points to increase stability.
After installing the fluorine lined three-way ball valve, the valve must be fully open when conducting pressure tests on the system or pipeline.