Introduction of lining materials for fluorine lined valves by fluorine lined valve factory

At present, fluorine lined valves are increasingly valued and widely used in industrial production, mainly due to their strong corrosion resistance. The different lining materials of fluorine lined valves are also suitable for different media. Next, Wenzhou Fluorine lined valve factory home Let me introduce the characteristics of different lining materials for fluorine lined valves and the media they are suitable for.
The lining materials for fluorine lined valves mainly include polytetrafluoroethylene (PCTEF) (F3), polytetrafluoroethylene (PTFE) (F4), polyolefin (PO), polypropylene (RPP), and so on.
1. The characteristics of polytetrafluoroethylene PCTEF (F3) are strong heat resistance, high hardness, electrical performance, etc. This material is mainly suitable for oxidizing acids and various organic solvents.
2. Polytetrafluoroethylene (PTFE) (F4) has strong heat and cold resistance, low friction coefficient, good self-lubricating ability, stable chemical properties, but relatively low mechanical properties and poor flowability. This material is suitable for media with strong acid, strong alkali, and strong oxidation.
3. Polyolefin PO can be said to be one of the currently ideal anti-corrosion materials, which can be applied to various concentrations of acid, alkali salts, and some organic solvents.
4. Polypropylene RPP is one of the lighter plastics, which has good tensile and compressive strength, good heat resistance, high hardness, and outstanding rigidity. This material is mainly suitable for aqueous solutions of inorganic acids and salts, as well as dilute or concentrated solutions of bases.
The above is the relevant knowledge of several lining materials for fluorine lined valves introduced by Wenzhou fluorine lined valve manufacturers.

Brief description of fluorine lined check valve manufacturer's electric valve control unit

Fluorine lined DC valve J45F46-16C