Introduction to the use environment of fluorine lined valves by fluorine lined valve factories

The price of fluorine lined valves is generally lower than that of corrosion-resistant stainless steel valves. Although fluorine lined valves are cheaper, their use is even better than metal valves in some highly corrosive media. Next, Wenzhou Fluorine lined valve factory Home mainly introduces the usage environment of fluorine lined valves for everyone.
1. Under normal circumstances, the temperature for using fluorine lined valves should not exceed 150 degrees. The temperature that can be used for a long time is 120 degrees. If exceeded, it will cause softening and deformation of the lining of various components of the valve. Of course, there are also fluorine lined valves that can be used for a long time at 150 degrees, but they are more expensive.
2. There should not be negative pressure inside the pipeline using fluorine lined valves, otherwise it will cause the fluorine lined plastic layer inside the valve cavity to be sucked out and peeled off, resulting in valve opening and closing faults.
3. The pressure and pressure difference of the usage environment should not be too high or too large.
4. The medium used must not contain crystals, hard particles, impurities, etc.

Let's talk about PTFE lined valves from fluorine lined valve factories