Storage, installation, use, and maintenance of clamp type fluorine lined butterfly valves

    clamp-on Fluorine-lined Butterfly Valve Storage: Before the valve is put into use, the disc should be kept unopened and stored in a ventilated or dry warehouse. Stacking and outdoor storage are strictly prohibited. Both ends of the valve should be sealed with caps to prevent dust and impurities from entering the interior of the valve and ensure its cleanliness.
Installation: During installation Clamp type fluorine lined butterfly valve When installing the valve, it is necessary to carefully check whether the valve markings and certificate of conformity meet the requirements of the pipeline. Only after everything is correct can installation be carried out. During the installation process, the sealing surface of the valve should not be damaged. When connecting the lining and pipeline, do not add gaskets. For metal pipeline connections, corresponding gaskets can be used to ensure that the sealing surface is not worn. Correct installation and operation of fluorine lined butterfly valve
When using the clamp type butterfly valve, fully open or fully close it, do not adjust the flow rate for use, and do not use it under negative pressure conditions. In the use of this type of valve, square should be carried out, and if a fault is found, it should be stopped and the cause eliminated.