Common size standards for clamp type fluorine lined butterfly valves

clamp-on Fluorine-lined Butterfly Valve Its size ranges from 2 "(DN50) to 40" (DN1000), with hard seat and dual Dtype gate The valve body shall have at least four side flange drilled holes The following manual devices can be installed on the valve:

The structural length of the manual device (2 "to 12"), manual gear lever (2 "to 40"), and electric and pneumatic device (2 "to 40") is suitable for GB 12238 BS5155 API609, MSS SP-76,DIN 3202-K1 (ISO 5762 T5).

The advantages of clamp type fluorine lined butterfly valves in modern industry

The side flange hole meets the following standards: GB9112-88, DIN2501, BS4504, ISO2084, ISO2531, BS10-E,ANSI125/150,ASA125/150,AS2129 Table D/E. Valve testing: API598 Safe working pressure: PN6,10,16 As shown in the picture: Butterfly valve BV1000L

Note:
The dimensions of "M", "L1", "L2", and "D1" comply with the following standards: GB9112-88, DIN2501, BS4504, ISO2084, ISO2531, BS10-E, ANSI15/150, ASA125/150.AS2129 Table Weight (kg)