Characteristics of using clamp type fluorine lined butterfly valve

clamp-on Fluorine-lined Butterfly Valve Suitable for highly corrosive and toxic chemical media, with a special sealing structure design that ensures long-lasting and safe sealing performance even under harsh working conditions. The valve body adopts a two-stage design, which facilitates future maintenance and replacement of seals.

    Clamp type fluorine lined butterfly valve Adopting an integrated molded valve plate and stem design, the main sealing positions of the valve plate and stem are simultaneously covered with polytetrafluoroethylene with a thickness of over 4mm to ensure that the medium does not corrode the inside of the valve body. The PTFE valve seat with a diameter of 3mm or more isolates the valve body from the medium. The ethylene propylene rubber elastic gasket design on the back of the valve seat ensures the elasticity of the PTFE valve seat and the sealing performance when the valve is closed. GEFA multifunctional control platform, interchangeable with different sizes of platforms, directly installed with the actuator, avoiding the use of bracket adapters, making valve opening and closing more convenient.
The clamp type fluorine lined butterfly valve is suitable for the operation indicators of saltwater refining membrane filters, meeting the following technical parameters: the medium is 30% NaCl by mass, the temperature range of the medium is 45-60 ℃, the pressure range of the instrument air is 0.4-0.7MPa, and the allowable operating pressure range of the butterfly valve is 0-1.0MPa.
Parameters and quotation of fluorine lined butterfly valve D371F46-16C